Our newest DirtyDogMTB products, Skull Bucket Cable Guides! These things are awesome! Instead of simply putting a zip-tie on your bike to hold your cable casing down, which takes the paint off of your frame or ruins the anodizing, move the casing off of your frame with a Skull Bucket!

DirtyDogMTB Cable Guides

30 packs for shops and 2-packs for consumers.

Don't get dizzy!!!!

Plain old zip-tie and cable casing

This is how you get cable rub

Bummer, look at the frame rub, that sucks!

Step 1 of installing a Skull Bucket Cable Guide

Slide the zip-tie through the cable guide

This shows the optional mounting addition of the VHB double stick foam. If you are putting the Skull Bucket Cable Guide on a taper, then use the double stick foam to keep it from slipping. If you are putting these on a mountain bike, then use the zip-tie. If it is a chopper, then you might be able get away with just the foam, but then the zip-tie won't lift the cable casing off of the frame, which is a great feature of these guides. We strongly recommend the zip-tie and do not warranty the foam alone to hold it in place. The foam only assists to prevent slippage on a taper.

 

When you're done, it looks SO FREAKING COOL!

Check out how the cable won't rub and trash your frame any more!